top of page
  • Linkedin
  • Twitter
  • Instagram
  • Facebook
Header1920.jpg

PUBLICATIONS

T. R. Mundon and J. van 't Hoff  “An approach for peak load limitation within a hydraulic Power Take Off” presented at the European Wave and Tidal Energy Conference, Plymouth, UK, Sep. 2021, pp. 1921-3.

​

R. G. Coe et al., “CFD design-load analysis of a two-body wave energy converter,” Journal of Ocean Engineering and Marine Energy, vol. 5, no. 2, pp. 99–117, 2019, doi: 10.1007/s40722-019-00129-8.

​

B. J. Rosenberg et al., “Development of WEC design loads: A comparison of numerical and experimental approaches” presented at the European Wave and Tidal Energy Conference, Napoli, Italy, Sep. 2019, p. 8.

​

T. R. Mundon, “Performance evaluation and analysis of a micro-scale wave energy system,” presented at the European Wave and Tidal Energy Conference (EWTEC), Naples, IT, Sep. 2019, pp. 1686-1–8.

​

T. R. Mundon and B. J. Rosenberg, “Development of a survival configuration for the Triton wave energy converter,” presented at the Marine Energy Technology Symposium (METS), Washington, DC, USA, May 2018.

​

B. J. Rosenberg and T. R. Mundon, “Development and field testing of pto control strategies for two-body flexibly-connected WECs,” presented at the Marine Energy Technology Symposium (METS), Washington, DC, USA, May 2018.

​

T. R. Mundon, B. J. Rosenberg, and J. Van Rij, “Reaction body hydrodynamics for a multi-DOF point absorbing WEC,” in Proceedings of the 12th European Wave and Tidal Energy Conference, Cork, IE, Sep. 2017.

​

T. R. Mundon, B. J. Rosenberg, and J. Vining, “A hybrid drivetrain for low speed, linear WEC applications,” presented at the Marine Energy Technology Symposium, Washington, DC, USA, May 2017.

​

J. Vining, T. Mundon, and B. Nair, “Electromechanical design and experimental evaluation of a double-sided, dual airgap linear vernier generator for wave energy conversion,” in Energy Conversion Congress and Exposition (ECCE), 2017 IEEE, 2017, pp. 5557–5564.

​

B. J. Rosenberg and T. R. Mundon, “Numerical and physical modeling of a flexibly-connected two-body wave energy converter,” presented at the Marine Energy Technology Symposium (METS), Washington, DC, USA, Apr. 2016.

​

T. R. Mundon and B. J. Rosenberg, “Progress in the hydrodynamic design of heave plates for wave energy converters,” presented at the ICOE, Edinburgh, Scotland, Feb. 2016, doi: 10.13140/RG.2.1.3671.4646.

Oscilla Power, Inc. (OPI) is developing an advanced wave energy converter that can unlock the tremendous renewable energy potential of the world’s oceans.

CONTACT

4240 GILMAN PLACE WEST, UNIT B/C

SEATTLE, WA 98199

INFO@OSCILLAPOWER.COM

TEL. 206-557-7032

  • Facebook
  • LinkedIn
  • Twitter
  • Instagram

© 2024 Oscilla Power. Created by Form Marketing & Design. 

bottom of page